Machine list

LATHES

(1) DOOSAN 670L LATHE 26.3" X 70.87" 4.06 BORE PROGRAMMABLE TAIL STOCK

(1) HAAS SL20 CNC LATHE 10” X 20” 2.062” BORE WITH BAR FEEDER & PARTS CATCHER. PROGRAMMABLE TAIL STOCK.

4000-RPM SPINDLE.

(1) OKUMA HOWA ACT4 2 AXIS CNC LATHE

(1) Engine Lathe 20" x 80"

(1) ENGINE LATHE 26" x 120"

multiple 3 & 4 JAW CHUCK / 5C COLLET CLOSER

___________________________________________________________________________________________________

HORIZONTAL MILLS

(1) KBN135 BORING MILL

TABLE SIZE mm (in) ___________________ 2,000 X 1,800 (78.7 X 70.9)

MAX LOAD ON PALLET kg (lb) ___________ 10,000 (22,046)

TRAVEL (X/Y/Z) mm (in) _______________ 3,000 X 2,000 X 1,600 (118.1 X 78.7 X 63)

RAPID TRAVERSE (X/Y/Z) m/min (ipm) _ 8 / 8 / 8 (315 / 315 / 315)

TAPER NT_____________________________ #50

SPINDLE SPEED________________________ 2,000

SPINDLE POWER kW (HP) _____________ 22/18.5(30/25)

TOOL CAPACITY EA ___________________ 40

CONTROLLER _________________________ FANUC 16iM

(1) MAZAK HORIZONTAL MACHINING CENTER MODEL H-630

     6 PALLETS - Pallet size - 24.7" X 24.7"
     X-Axis Travel - 39.4"
     Y-Axis Travel - 31.5"
     Z-Axis Travel - 29.5"
     Number of tools in ATC - 120

     Spindle Taper - CAT #50
     Spindle Speeds - 4500 RPM
     Spindle Motor - 20/30 HP
     Table Load Capacity - 2460 Lbs
     Table Indexing - 1 Degree
     Rapids Traverse (X,Y,Z) - 787 ipm
     Approximate Machine Weight - 38,000 Lbs

___________________________________________________________________________________________________

VERTICAL MILLS

(1) HAAS VF-8 CNC VERTICAL MILLING CENTER 64"X40"X30” : 10,000-RPM 30HP SPINDLE & PROGRAMMABLE & thru the spindle

COOLANT.

(1) HAAS VF-3 20" X 40" X 25” CNC VERTICAL MILLING CENTER: 7500-RPM 20HP SPINDLE & PROGRAMMABLE COOLANT.
(1) HAAS VF-0 20" X 16" X 20” CNC VERTICAL MILLING CENTER: 15,000-RPM 20HP SPINDLE & PROGRAMMABLE COOLANT.

(1) HAAS VF-2ss 30"X16"X20” CNC VERTICAL MILLING CENTER: 12,000-RPM 30HP SPINDLE, GLASS SCALES, & Programmable COOLANT.

(1) HAAS VF-3ssyt 40"X26"X25” CNC VERTICAL MILLING CENTER: 12,000-RPM 30HP SPINDLE, GLASS SCALES, & PROGRAMMABLE

COOLANT.

(1) BRIDGEPORT MILL WITH ROTARY TABLES

___________________________________________________________________________________________________

4^TH AXIS ROTARY TABLES

(Simultaneous WITH HAAS MILLS)

(1) HA5CS-CNCB ROTARY 4TH AXIS Super High Speed 725 deg/sec Servo Indexer w/manual collet closer. For small parts

machining, high-speed drill & tap operations or repetitive

parts where fast cycle times are important

(1) HAAS HRT 160 ROTARY 4^TH AXIS

(1) HAAS HRT 210 ROTARY 4^TH AXIS

(1) HAAS HRT 210SHS-CNC-HD 210 ROTARY 4^TH AXIS DETAILS: 210 mm (8.27") Servo Rotary Table w/super-high-speed 360 deg/sec

indexing. Nearly six times faster than the

standard HRT 210, the 210SHS greatly increases productivity with rapids to 360 deg/sec and feed rates to 270 deg/sec.

___________________________________________________________________________________________________

5^TH AXIS ROTARY TABLE

(Simultaneous WITH HAAS MILLS)

(1) TRT160

___________________________________________________________________________________________________

Saws

(1) S-20A Series III

60 degree One-way Miter Capability

1" x 14'10" blade

17¾" Heavy Duty Cast Band Wheels

3 Hp Direct Drive Motor with A/C Inverter offering Variable Band Speed from 45-330 SFM

Cast Iron Guide Arms. Adjustable Idler Guide Arm, supported by Linear Bearings

Safety Door Interlocks

Heavy Duty Vise with Quick Locking Lever System

Pre-Set Carbide Guide Inserts (no adjustment needed)

Manual Blade Tension with LED Display on Control Panel

Blade Breakage Switch

Ergonomically positioned "Swing Away" Control Panel

Flood Coolant System and Wash Down Hose

(2) AUTOMATIC Horizontal Band Saw

(1) ROLLIN Vertical Band Saw

___________________________________________________________________________________________________

Fabrication

(1) Syncrowave^® 250 DX

Stick (SMAW)

TIG (GTAW)

(1) MILLERMATIC 250 WIRE WELDER (MILLER)

(1) Manual BENDING MACHINE

___________________________________________________________________________________________________

DRILL PRESSES

(2) 1/2" CHUCK, 36" Vertical Travel

___________________________________________________________________________________________________

Grinders

(1) SURFACE Grinder 8" x 18"
(2) Bench Grinders

___________________________________________________________________________________________________

Miscellaneous

(2) BELT SANDERS

(4) ANGLE PLATES

___________________________________________________________________________________________________

Inspection room

(1) 18” x 24” surface plate

(1) 24” height gauge

(1) 9” digital caliper

(4) 6” digital calipers

(1) 24” digital calipers

(1) set gauge blocks

(1) set gauge pins up to .875 dia.

(2) dial bore gauges (.0001” increments)

(1) set of Mitutoyo individual micrometers 0-12" with standards (.0001”)

(1) Starret 0-9” depth micrometers

(2) set of telescoping gauges

(1) BROWN & SHARP 14” OPTICAL Comparator